How To Attach an iron on patch

Step 1

Set iron temperature to maximum (175° for digital irons) and turn off the steam. Place the patch on the area you want to cover.

Step 4

Allow to cool thoroughly before wearing and enjoy your upcycled piece of wearable art!

Step 2

Lay a piece of baking paper or thin cloth on top and press firmly onto all corners of the patch for 10 seconds at a time. Important: apply constant pressure, no back and forth motion.

Step 3

Turn the garment inside out and repeat step 2 from the reverse, this time pressing for a minimum of 15-20s.

Make sure you check the label of your garment before you apply any heat. We recommend doing a heat test on an inconspicuous area first.

Typically cotton, linen, denim and some polyester based fabrics are suitable.

Don’t put an iron on patch on any fabrics that contain: rayon, nylon, teflon, waterproofed or triacetate fabrics!